Instagram

Wednesday 31 August 2016

"Brief" Faction Overview in GUILD BALL - Helping you pick your Guild!

As promised from our podcast... speaking of which, if you want to listen to the audio version, it also has some added commentary that wont be found in this article, along with some other Guild Ball-related discussion, you can download it here.

This article will briefly go over each faction to help new players choose a Guild in their favourite mob soccer game. You'd be surprised how the Internet is not yet flooded with articles related to this, so I may as well contribute to the start of the future deluge. 

Just a disclaimer, these will be some pretty broad statements. The intention is just to give you an idea of what to expect when you play with and against these factions. If the article says something like “this Faction wants to score goals, but they can’t really kill anything,” it doesn’t literally mean that they can’t kill anything. Rather, they are just very focused on scoring goals, and have to go a bit out of their way or work harder to take down a model.

First, we will talk about the two most straight forward teams. This is not to say they are necessarily easier to play or are a vanilla faction. They are just very focused on what they do, and are conceptually easy to grasp for most people.

Fishermen – Excellent at mobility. Moving around, dodging all over the place. They are also the best overall team for consistently scoring goals. One thing to watch out for: while most teams usually want to receive the ball, Fishermen don’t mind kicking it. Don’t be surprised if you see Shark kick the ball up at the beginning of the game, get the ball himself, and then score a goal on turn 1. Many players feel that getting at least 2 goals with the Fishermen is almost certain. It’s how they get the last 4 VP’s to win the game that’s the puzzle they get to play.
Fun fact: The team only has 4 momentous damage results among all the players on the team, and 2 of them belong to the Captain: Corsair. So, don’t be too afraid of getting too many guys taken out when playing against the Fishermen. Instead, watch out for multiple Reach models striking you from out of combat range, and dodging around you to score more goals.

Butchers – These are guys are on the other end of the spectrum as the Fishermen. They hit hard, they easily take down most players in the game, and they generate a ton of momentum doing it. They are the glass cannons of the game, and if you like slicing through your opponents, this is the faction for you. Their starter box captain, Ox, is a Force multiplier. He basically has a damage buff aura that is always on, some damage debuffs, and a Legendary play that buffs damage even more. So, the idea here is, no matter what damage result you roll, let’s just say 1 damage, after all the buffs, it counts as 3-4 momentous damage. You start going higher up on the playbook, and you can get 5+ damage on a single hit! The other captain, Fillet, is kind of the opposite, where she wants everyone to support her and funnel their power into her so she can slice through the opposing team herself and dance away. Either way, you get to cut through your opponents with a sweet cleaver.

Now we’ve covered two teams that are on the opposite ends of the spectrum. The rest of the factions are a bit more nuanced and their strategy varies greatly from team to team.

Brewers – If the Butchers are about slicing through your opponents with a cleaver, the Brewers are more about a beat down with a tree stump. They do a lot of knockdowns, they are resilient, and they can do a lot of damage. The differentiating factor of Brewers damage versus Butchers damage, is that Butchers have consistent damage across their playbook, and it’s almost always momentous. With the Brewers, they generally only have one or two damage columns, with only one usually being momentous. Usually it’s the big damage number. However, since they have short playbooks, combined with their buffs and ability to knock down, they often get to wrap the playbook, so you get the possibility of big spikey damage.

Morticians – At the time of this podcast, people would already have heard that Gencon’s top 3 players were all using Morticians. Fear not, new people. Apparently, this is only really an American trend, and the overwhelming presence of the Morticians at top tables is not pronounced there. What makes this faction good? It’s about controlling the game. You can steal Momentum, increase Influence costs, move your opponents models. If you like to actively screw around with your opponents plans, this is the faction for you. The biggest piece to note though, is the original captain: Obulus. He is the most prominent face of the Morticians. He manipulates models, he steals Influence and gives it to his friends, and he himself requires effort to pin down. And his influence stat is 5/8, so that’s apparently good.
Alchemists – While the Morticians directly manipulate the battle, the Alchemists manipulate the field by putting AOEs all over the pitch, and they create cover for themselves, and put conditions on their opponents. They will also try to directly put all kinds of conditions on your models. So, if you don’t have an efficient way of removing conditions, expect to take poison damage and be lit on fire all the time. Midas himself is also an incredibly versatile Captain that has defined this faction for quite some time. He is another super-star Captain that is resilient because he is hard to hit and pin down, he can lay the smack down if required, and he can steal a Character Play for the rest of the game. This means if you have something really sweet, let’s say Scything Blow, then Midas will also have that sweet ability to use against you all game. The faction is relatively pillow-fisted when it comes to hand-to-hand combat, so condition damage and scoring goals is the name of the game here.
Engineers – Are the ranged faction. They love to use Character Plays to damage, push, and knock down their opponents. I said the Alchemists were kind of pillow-fisted. What’s even fluffier than pillows? In hand-to-hand, the Engineers may be the worst team. So the idea is to keep the enemies at bay through ranged control, and score some goals to win.
Masons – This is one of the most versatile factions, and it’s the synergy faction. Overall, the Masons have high armour for resilience, they have a lot of pushes, and they have the ability to activate multiple times, thanks Honour, every turn. They have arguably the best Striker in the game, Flint, who can score a goal 22 inches away, unassisted. Add in random shenanigans, and you are almost guaranteed 1 goal every game. Then, we have the concept of the Mason’s Missile. Essentially, one model (either Chisel or Mallet, goes almost the whole way across the table, takes someone out, then retreats back to safety. You also have Honour, can either choose to give someone else an extra activation, score a goal with her 4 dice kick stat, or beat down almost anyone herself, with the appropriate buffs, you have a team that does it all. This all sounds awesome and OP, but there are some things to consider. First, the synergy concept. If you start removing key pieces, let’s say Marbles their mascot, they lose a lot of board control and damage potential. Chisel is fragile, and likes to hurt herself to ramp up damage, so she is easy to remove as the game goes on. Removing Honour herself shuts a lot down. The Mason’s generally have to wrestle with the order of their activations every turn. The more you can wrenches you throw in their gears, the more they have to cope with what to do next.

Hunters – The newest faction to be released, the Hunters are the most different of all the other guild’s. Since they are the first new Guild after the initial Guilds were released, Steamforged really tried to shake things up. The Hunters are about de-buffing enemies, then doing take-outs for the majority of the time. They also have the ability to score random goals to contribute to the win. Their biggest trademark is the ability to easily put out a condition called Snared on the opposition. This slows down their enemies, and lowers their defense so the Hunters can run amok with their opponents having a reduced ability to retaliate. Theron, the captain puts snared on any target he damages, and then he puts up a forest every turn that he can use as cover, to hinder opponents movement, or other creative things. They also have the ability to put out trap markers all over the field to put even more snared conditions on the opponents. The short way to describe the faction: they are a ranged faction that slows down and softens up their opponents, and then finishes them off in melee. They are a pretty versatile faction, but they have some drawbacks. They are relatively squishy. They tend to not have armor stats and they have to be careful with their Influence use, as almost every character wants to be loaded up, so the Hunter player has to prioritize and make what feels like big sacrifices every turn. Theron is kind of the lynchpin to a lot of the Hunters plans, so if you are able to take him out early, you can greatly change the game in your favour. Jaecar is also a high priority target that will probably make it into every Hunter’s team forever. He is their main damage dealer, and he puts out trap markers, making him incredibly useful for the Hunters.

I hope this article helped you decide which faction to choose. Personally, I doubt you can go wrong, no matter what faction you choose. And most people tend to end up getting more than one faction anyway. Regardless, have an amazing day! Until next time!

-aY


DIY: How to make a GUILD BALL mat - A step-by-step guide


This article is going to show you, step-by-step, how to make a sweet, textured, rollable mat for your favourite mob soccer game: Guild Ball!

The materials you will need: 
-3x3 cloth surface. Felt, or any cheap but durable cloth will do.
-At least 2 tubes of Acrylic caulking (and a caulking gun will be helpful)
-A flat tool to spread acrylic. I used an ice scraper.
-A sponge
-Paint
-Painters tape
-White spray paint, and whatever paints you want your surface colour to be
-A print-out of the Guild Ball logo
-Precision knife


Step 1- The first step is to spread the caulking all around the mat. You can apply liberally. As stated before, it will probably take at least 2 tubes.



Step 2- Use the flat surface tool to spread the globs of caulking around, evenly on the mat. You ideally want the whole mat to look white.


Step 3- Once the whole surface is covered, take the sponge and just dab the surface all over. The point of this is to get texture on the mat. It will look like grass or rough ground.
Step 4- Paint the mat in your desired colour. The most obvious colour would be green, but really, whatever terrain you like, that is what you can paint. Important note: try to use THREE (3) colours.                                                         

So, for this green pitch, get a Dark Green, a lighter green, and yellow. Paint the whole surface with the darkest colour first. Once it dries, lightly brush (think drybrushing) the lighter green over most of the mat. Once that dries, use the yellow and sparingly drybrush parts of the mat. This will make the whole mat look better.




Step 5- Now, to truly turn this mat into a GUILD BALL pitch, you need to add the details!
Take the print-out of the Guild Ball logo, and start cutting out the black parts. This will essentially become a stencil for you to use as the main focal point of the mat.



Step 6- Next, you are going to use the painters tape and block off parts of the mat to make it easy to spray paint on the white lines of the pitch.

This is probably the most work-intensive part of the whole project, but it's not hard.

You need several specific measurements:

-Tape at the 10-inch mark to mark the deployment zone. You will then put a second piece of tape just below that tape, leaving a gap to be as thick as you want the line to be.


-Tape the stencil on the center of the mat, and tape off the half-way line (18 inches). Helpful tip: the stencil may flop around later when we spray paint it, so you may want to roll up tiny pieces of tape and tape down the stencil. Don't worry too much about taping EVERYTHING. No matter what you do, it wont be perfect. We just want it to not be too messy.

 -Tape on the 6-inch mark to represent the goal line. This part isn't really important, but it will help complete the look of the field.

Once again, a second piece of tape just below that one with a gap in between as wide as you want the line to appear on the pitch.

To add even more flair, you can put smaller pieces of tape every inch or so to make it a dotted line!


 
 Step 7- Time to spray the exposed areas between the tape, and spray the stencil.
Step 8- You may notice the lines have bled out a bit. It's natural. So, we are going to manually touch up the over-spray and blurred lines.



Step 9- Another optional part, but it still completes the look of the pitch. Get a large circle to mark as the actual Goal circle.
We are now done the Guild Ball pitch!

The total material cost of this sweet mat (Canadian):
-Felt: $3-7.
-2 tubes of caulking: $5.00
-3 paints from the dollar store: $3.75

The other stuff, I had laying around. As miniature gamers, you probably also have white primer at home, and most people have painters tape at home. That stuff is inexpensive too.

TOTAL COST TO MAKE MAT: $11.75!



I hope you enjoyed this post, and found the guide useful. I have already made 4 different mats this way, and they are all a little different and unique. If you want to go for a more "used" look on the pitch, you can intentionally leave gaps in the caulking and then glue sand into the patches.

Happy Guild Balling on your sweet new pitch!

And thank you Steam Forged Games for making a game that I love to share!

-aY

Monday 29 August 2016

The Troll Patrol podcast- Helping new players pick a team in Guild Ball!

Well, the Troll Patrol is podcasting again...

I've noticed that the Guild Ball forums regularly get new threads asking questions along the lines of "I am new to Guild Ball. What faction should I play?"

These threads get a lot of activity, all giving good information, spread out among many posts and responses. I personally dug around the internet when I was starting Guild Ball to help me with my starting faction decision as well, and I too found information a bit too spread out. So, I took it upon myself to compile some brief summaries of every faction, in one spot.

I will put out a transcribed, written version on this podcast on a very near-future blog post. But for now, I just wanted to get the word out.

Please enjoy!

-aY

http://museonminis.com/troll-patrol-guild-ball-faction-overview/

Friday 26 August 2016

Painting models throughout my life.

When I first got into the whole miniature game hobby, painting was the last thing on my mind. I tried to paint because I wanted my bare metal and plastic models to look cooler, but without any direction or advice, my paint jobs looked like thick, gooey messes that obscured any detail the model may ever have had.

Eventually, I would get a part-time job at GW, and with it, there were certain expectations. Aside from the fact that you were not allowed to play with unpainted models there, being an employee, I felt I needed to up my abilities to be worthy of the GW-staff mantle. So, I asked my co-workers for advice on how I could improve my skills. They gave me what was very obvious and basic advice, but at the time, they were things I didn't even think about doing.
Increase your colour palette. Use a palette! Add some water to your paint. Hold your wrists together so you don't shake. Lick your brush to keep the point (most people still don't like to do this one, but I do it religiously). Simple concepts, but they started me on the road to becoming a decent painter.

There was just one problem: I didn't care about painting that much. But as I mentioned before, you couldn't play with unpainted models. So, I started painting faster. I still used the advice I was given. But I just painted as fast as I could, and kept everything in the lines. Over time, I started becoming pretty good at the whole speed painting thing. Depending on the type of model, let's say ones with lots of ridges and mainly metallic robot guys, I could even drybrush the majority of it. If I primed my models black, it could hide uneven coats of paint. I painted a whole Eldar army in one day so I could play in an event the next day. It was crazy.

I honed my skills over time, improving over the course of a decade to the point where my models looked pretty good. Then, I met some guys at my local game store, the Friendly Troll. There were two new guys that came: Alan and Brandon, and some existing people Andrew and Thomas. They were all excellent painters. They taught me the concept of how to blend and use more subtle highlights. I even tried to slow down my painting to try and do a "great job" instead of my regular "good job." However, I noticed I just wasn't at the skill level to see any sort of improvement when I slowed down, so I went back to speed painting my things.

But more time has passed. Another 3 or 4 years or so. My models still aren't going to win any awards. However, I see noticeable improvement over the models I painted even just 3-4 years ago. A lot has changed in the industry. Paints seem to have an overall better quality. GW shades (aka: "Liquid Talent" as Andrew calls it) literally upgrade a paint job a level. Bad becomes decent. Decent becomes good, etc. Paints are actually cheaper in real dollars. When I started about 20 years ago, GW paints used to be $4.00. Today, they are still $4.00. That means they are actually half as expensive as they used to be if you consider inflation! Best of all, since the Internet exists, people are able to exchange ideas. Even if it's not about painting directly, just being with other miniature gamers is bound to expose you to painters and sweet paint jobs.

All I know is, when I got Dust into this hobby, I taught him some very basic lessons on how to paint. It was information I was never given for a good 7 years or so. And guess what? Right off the bat, Dust's models looked way better than my first 7 years of painted models ever looked. Everyone is right: knowing is half the battle!

So, while I still have things I can improve on, I am happy with how my models turn out these days. I don't use black primer anymore. I certainly don't drybrush anymore. And I'm even more happy knowing that I belong to an elite few who are able to paint up some pretty sweet looking models in a very short time. That Chisel model pictured above? I don't know how long it took me to paint it. All I know is, I assembled, cleaned, primed, waited for primer to dry, and painted the whole thing in less than an hour and a half!

Anyway, I hope you all enjoy the hobby, whatever way you see fit. But I wanted to thank all the people who helped me along the way to get me to the point where I am today. I am always improving, and a lot of it has to do with those who have given me advice. And for those who want some advice from me, feel free to ask! :)

-the aY

Thursday 25 August 2016

First Post!

It's tough being a gamer.

This is a very first-world problem situation, I know. Despite the absurdity of saying "it's tough doing things I enjoy," it doesn't change the fact that I have so many wants in life, and there's just not enough time to do it all.

All my life, I've played games of some kind. Video games are the obvious example, but I remember going to some store in Toronto called Jester's Cap to buy Magic cards (my first foray into nerd gaming), and I remember seeing these boxes called "Warhammer" on them. They were toys or models or something, but I was told that you got to put them on a battlefield and play with them. It looked sweet, but as a 13-year-old, it looked prohibitively expensive. Plus, my cousin was "too cool" for this sort of thing, so he quickly talked me out of it.

I would always have a little niggling in the back of my mind that scratched at me and said, "hey... do you wanna play Warhammer?" I repressed it, because it was apparently lame to play games like that.

A year later, I go to visit my friend/neighbours house. We were supposed to play basketball, but he was sick or something. So, I thought I'd be thoughtful and hang with him at his house so he wouldn't be lonely. His brother opened the door, and as I peered in, I saw my friend, with some other people and my cousin who was too cool to play Warhammer... playing Warhammer! The cat was out of the bag. They were all uncool. And so, I joined them.

Years go by, and I get really hardcore in a variety of games. Warhammer, Magic on and off, Vs System (a Marvel and DC card game where you could win a lot of money), UFS, World of Warcraft Card game, Warmachine... basically a lot of time and money spent on a variety of games. When I get into something, I get pretty hardcore. The money part could be tough sometimes, but these days, it's time that I'm lacking.

Despite that, I have somehow found time at 1:00 AM on a random Wednesday (though it's technically Thursday now) to write a blog for posterity. Even if no one else reads this blog, I'll at least have some posterity... the day has been marked: the aY (me) of the Troll Patrol has started a diary, to talk about whatever gaming things are on my mind.

Should I go to sleep, or keep painting some models?

It's tough being a gamer.

-the aY